The first campaign is usually the hardest one to send. The platform is new, the list feels small, and every decision seems to matter more than it will a few months later.
It helps to lower the stakes. A first campaign does not need to be clever or beautifully designed. It needs to reach the right people, say one useful thing clearly, and produce enough information to make the second campaign better.
This guide walks through the process in order, from deciding what the email is for to reading the results afterwards. It assumes a platform has been chosen and that the list is made up of people who have agreed to receive the messages.
Key takeaways
- Decide what the campaign is for before opening the editor. A clear goal makes every later decision easier.
- A first campaign works best with one message and one call to action.
- Set up the sending domain, sender name and reply address before writing anything.
- The subject line and preheader decide whether the email is opened; the first few lines decide whether it is read.
- Simple layouts are more reliable across email clients and easier to read on a phone.
- Test every campaign on real devices, and click every link, before sending.
- Judge results by clicks and outcomes rather than opens, and write down what was learnt.
Step 1: Decide what the campaign is for
Start with a single sentence: "After reading this email, we want the subscriber to…". If the sentence is hard to finish, the campaign is not ready to be written.
Useful goals for a first campaign are modest and concrete:
- welcome subscribers and explain what they will receive;
- bring readers to one article, guide or page on the website;
- announce a product, service or event;
- present an offer to existing customers;
- ask a question that helps plan future emails.
Choose a way to measure the goal at the same time. Visits to a page, bookings, replies or purchases are all suitable. "Awareness" is not, because nobody can tell afterwards whether it happened.
This is also where the most useful rule for a first campaign applies: one email, one goal, one action. An email that asks readers to read the blog, follow on social media, browse the shop and book a call usually achieves none of them.
Step 2: Choose who will receive it
With a small list, sending to everyone is normally reasonable. What matters is that every recipient has a lawful reason to be there and can still recognise the sender.
Before the first send, review the list:
- remove addresses with obvious typing errors and any duplicates;
- exclude anyone who has unsubscribed or asked not to be contacted;
- check that there is a record of where each contact came from;
- consider whether very old contacts will remember signing up.
If part of the list has not heard from the organisation for a long time, the first email should say plainly who is writing and why the person is receiving it. That one sentence prevents a good number of spam complaints.
If the list contains clearly different groups, such as customers and people who have only subscribed to the newsletter, ask whether the same message suits both. Two short versions are often better than one compromise.
Step 3: Prepare the sending setup
A few technical details should be in place before any writing begins. They are done once and benefit every later campaign.
- Send from the organisation's own domain, not from a free personal address. Follow the platform's instructions to authenticate the domain with SPF, DKIM and DMARC, and wait until the platform confirms the records are working.
- Choose a recognisable sender name. The business name, or a person's name together with the business, tells readers immediately who is writing.
- Use a reply address that someone reads. A "no-reply" address discourages the conversations that email is good at starting.
- Complete the footer. It should include the organisation's identification details and, where required, a postal address.
- Check the unsubscribe link. It should be visible, work with one click and remove the address immediately.
Step 4: Plan the content
With the goal and audience clear, outline the email in four lines before writing it:
- What is the single message?
- Why does it matter to the reader now?
- What should the reader do next?
- Where does that action take them?
The fourth point is easy to forget. If the email sends people to a web page, that page needs to be ready, correct and consistent with what the email promised. A good email leading to a confusing page wastes the click.
Add tracking parameters (UTM tags) to the links so that the website's analytics can identify visits from the campaign. Many platforms do this automatically once the option is switched on.
Step 5: Write the subject line and preheader
The subject line and the preheader, the short text shown beside or beneath the subject in most inboxes, work together. Between them, they should tell the reader what the email contains and why it is worth opening.
- Be specific. "Three ways to prepare the garden for winter" says more than "Our November newsletter".
- Put the important words first. Phones cut subject lines short, and the amount shown varies between email apps.
- Describe the content honestly. A subject line that promises something the email does not deliver earns one open and loses trust.
- Use the preheader to add information, not to repeat the subject. If it is left empty, the inbox shows whatever text comes first in the email, which is often "View in browser".
- Avoid artificial urgency, capital letters and rows of exclamation marks.
Write several options and choose the clearest. If the platform offers a simple A/B test and the list is large enough for the result to mean something, test two subject lines; with a very small list, the difference is mostly chance.
Step 6: Write and design the email
Write the email as one person addressing another. The first lines should deliver the main point, because many readers will not go further.
For the text:
- open with the message, not with an introduction about the company;
- keep paragraphs short and use a subheading or two if the email is long;
- explain the benefit to the reader rather than listing features;
- make the call to action a clear instruction, such as "Read the guide" or "Book a place";
- repeat the call to action at the end if the email is longer than one screen.
For the design:
- Prefer a single-column layout. It adapts best to phones and to the differences between email clients.
- Do not rely on images to carry the message. Some email clients block images by default, so important text should be real text.
- Add alternative text to images that convey information.
- Make buttons and links easy to tap, with enough space around them.
- Use readable type and sufficient contrast, and check how the email looks in dark mode.
- Keep the branding light. A logo, the brand colours and a consistent footer are enough.
A plain, well-written email is a perfectly good first campaign. Elaborate templates can come later, once it is clear what subscribers respond to.
Step 7: Test before sending
Almost every mistake in a first campaign could have been caught by a test. Send the email to several addresses and read it as a subscriber would.
| Check | What to look for |
|---|---|
| Sender and reply address | Recognisable name; replies reach a monitored inbox |
| Subject and preheader | No typing errors; nothing cut off awkwardly on a phone |
| Links | Every link clicked and leading to the right page |
| Personalisation | Names appear correctly, with a sensible fallback when a name is missing |
| Display | Readable on a phone and a computer, in Gmail, Outlook and Apple Mail, in light and dark mode |
| Images | Load quickly, have alternative text, and the email still makes sense without them |
| Footer | Identification details present; unsubscribe link works |
| Audience | Correct list or segment selected; unsubscribed contacts excluded |
| Text | Proofread by a second person where possible |
Leave some time between finishing the email and checking it. Errors are much easier to see after a break.
Step 8: Choose when to send
There is no universally best day or time. Published studies point in different directions because audiences differ.
For a first campaign, choose a moment when the audience is likely to be reading email and someone from the team is available to answer replies and deal with any problem. Avoid sending last thing on a Friday and then leaving.
Use the scheduling option, and check the time zone setting in the platform. After a few campaigns, the organisation's own results will be a better guide than any general advice.
Step 9: Send, then stay close
Once the campaign has gone out, the first hours provide useful signals:
- Replies. Answer them promptly; they are the most valuable response an email can receive.
- Bounces. Addresses that fail permanently should be removed. Most platforms do this automatically.
- Unsubscribes and complaints. A few unsubscribes are normal, especially on a first send. A noticeable number of spam complaints suggests that recipients did not expect the email.
- Website activity. Check that visits from the campaign are appearing in analytics and that the destination page is working.
If a mistake is found after sending, judge its importance calmly. A small typing error rarely justifies a second email. A broken link or a wrong date usually does: a short, clear correction is enough.
Step 10: Read the results
Wait a few days before drawing conclusions, since many people read email later than the day it arrives. Then look at the figures in order of usefulness.
| Measure | What it shows | How to read it |
|---|---|---|
| Delivery and bounces | Whether the messages reached mailbox providers | High bounce rates point to list quality problems |
| Clicks | Whether readers acted on the message | The most reliable sign of interest inside the email |
| Goal completions | Bookings, purchases, enquiries, replies | The measure chosen in step 1; the one that matters most |
| Unsubscribes and complaints | Whether the email matched expectations | Compare with later campaigns rather than judging one figure alone |
| Opens | An approximate indication of reach | Treat with caution: privacy features in some email apps record opens that no person made |
With a small list, percentages move a great deal from one campaign to the next. A single result is not a trend. What matters at this stage is building a record to compare against.
Write down, in a few lines, what was sent, to whom, when, the results and one thing to try differently next time. That note is the beginning of the organisation's own benchmark.
Step 11: Plan the next one
The value of email comes from consistency, so decide when the next campaign will go out before the first is forgotten. A realistic rhythm that the team can maintain, such as once a month, is better than an ambitious schedule that lapses after three weeks.
Change one thing at a time. If the subject line, the layout and the sending day all change together, it is impossible to know which made the difference.
Frequently asked questions
How many subscribers are needed before sending a first campaign?
There is no minimum. A campaign sent to fifty interested people is worthwhile and provides practice with the platform while the stakes are low. Waiting for a large list usually means the earliest subscribers have forgotten why they signed up.
How long should the email be?
As long as the message needs and no longer. An announcement may need a few sentences; a newsletter with a useful article may need more. If the email is long, make the main point and the call to action visible near the top.
Should the first campaign be a newsletter or a promotion?
Either can work. For a list of new subscribers, an email that introduces the organisation and offers something useful is a safer start than a direct sales message. For existing customers, a relevant offer is often welcome.
Is a designed template better than a plain email?
Not necessarily. Plain emails often feel more personal and display reliably everywhere. Designed templates suit shops and publications with strong visual content. The clarity of the message matters more than the format.
Can the same email be sent again to people who did not open it?
It can be done occasionally, with a different subject line and after a few days. It should not become routine: open tracking is imprecise, so some of those people will already have read the email, and repeated resends increase unsubscribes and complaints.
What if hardly anyone clicks?
It is useful information rather than a failure. Check whether the call to action was clear, whether the content matched what subscribers signed up for and whether the email reached the inbox. Then change one element and try again.
The first campaign is a starting point
No first campaign is perfect, and it does not need to be. Its job is to open a line of communication with people who have asked to hear from the organisation, and to show what they respond to.
Keep it simple: one email, one goal, one action. Send it to people who expect it, test it properly and record what happens. Each campaign after that will be easier to plan and better informed than the last.